XYZ Printing da Vinci Filament Cartridge Counter Resetter Reset Tool

XYZ Printing da Vinci Filament Cartridge Counter Resetter Reset Tool

Availability: In stock

Regular Price: $24.95

Special Price $21.75

Quick Overview

This is the top selling most popular Filament Cartridge re-setter for the XYZprinting da Vinci 3D Printers. It resets your da Vinci filament cartridge so you can use your choice of filament. Also available on eBay.


Details

THIS RESETTER WORKS WITH ONLY THE FOLLOWING XYZWARE SOFTWARE AND PRINTER FIRMWARE VERSIONS

(You can verify what versions you have by clicking the 'About' button in the XYZware software)

XYZware 1.1.34.7  and older

Model   Firmware
da Vinci 1.0   1.1.G, 1.1.I, 1.1.J
da Vinci 1.0A   1.0.1, 1.0.3, 1.0.5, 1.0.6*
da Vinci Duo 2.0    2.0.J
da Vinci AiO   1.1.1, 1.1.3, 1.1.4*

Notes: (*) Only resets filament counter, no temperature control.


The re-setter software will only run on Windows 7, 8, 8.1, and 10


USB Version

This device lets you reset your XYZ catridge filament counter, set your own temperatures and choose ABS or PLA material, allowing you to use your choice of filament.

(Not all printers can print PLA)

This is the Most Popular, Lowest Priced, Fully Featured Resetter, check out our feedback

Order before 11am PST and we ship the same day, 6 days a week (Mon-Sat)

Why Pay more? Why Wait for slow mail service?

  

We also have a version that lets you wirelessly reset your cartridge while it is in the printer

Control everything on the cartridge chip:
 
  • Material (ABS or PLA)
  • Filament length (120,240) meters
  • Extruder temperature (via Drop Down: 180,190,200,210,220,230,240,250. Or Manually enter: 0-250) °C
  • Bed temperature (via Drop Down: 60,70,80,90,100,110. Or Manually enter: 0-110) °C
 
Other Features:
  • Applies a random cartridge serial number with each reset
  • Applies a full original factory image with updated settings on each reset
  • Can reset a corrupted cartridge chip
  • Comes with its own easy to use Windows desktop software
  
 
INCLUDES ASSEMBLED ELECTRONICS AND FREE DESKTOP SOFTWARE
COMPLETE UNIT SNAPS TOGETHER, ASSEMBLES IN SECONDS
LOWEST PRICED RESETTER AVAILABLE WITH ACCESS TO ALL SETTINGS RECOGNIZED BY FIRMWARE
 
 
YOU WILL NEED TO PRINT YOUR OWN HOUSING FROM OUR THINGIVERSE PAGE.



Software and Installation Instructions are available here and on the link on the card shipped with your resetter

The re-setter software will run on Windows 7, 8, 8.1, and 10
 
 
You will receive this:

You need to print this:

It assembles in seconds and is ready to use:
 
 
 
 
It is super simple to use:
-Plug the re-setter in using a common 'USB A to Type B Mini' cable 
-Remove the cartridge from your printer
-Place the cartridge on the resetter
-Start the re-setter software 
-Wait a few seconds while the software automatically locates and connects to your device 
-Another few seconds and the device determines if a cartridge is connected
-Select your settings
-Click 'Update Cartridge'
-Wait for the 'Cartridge Updated' message
-Remove the cartridge from the resetter
-Install the cartridge back in your da Vinci
 
 
This item includes the ASSEMBLED ELECTRONICS ONLY, and Windows re-setter program to control it. 
 
This item DOES NOT include the ABS housing, USB cable or a Filament Cartridge.
 
 

Additional Information

Free USPS 1st Class Shipping No

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.